DUCT MACHINE SERIES
1. Squareness Duct Automatic Production Line Series
Duct Automatic Line I
AML-I/IB
Equipped with decoiler, leveling&grooving unit, hydraulic shearing unit and full servo-controlled for synchronized precision.
Duct Automatic Line II
AML-II
On the basis of the Line I , ▽-shape and □-shape punching units have been added for the production of TDF and TDC flanges.
Duct Automatic Line III
AML-III
On the basis of the Line II, bending units have been added to process male pittsburgh, or to bend the sheet metal into a □-shape or an L-shape.
Duct Automatic Line V
AML-V（Straightening)
Equipped with decoiler, leveling&grooving unit, ▽&□-shape notching unit, cutting unit, reciprocating lock forming unit, feeding manipulator unit, duplex flange(for angle or TDF flange) unit, and automatic folding unit. It has high efficiency, and it can manufacture minimum 200*200 TDF flange duct. Capable of customizing multiple punching and forming units
Duct Automatic Line V
AML-V (U type)
On the basis of the Line V, upgraded automatic feed frame and supports additional customization of small-size duct desired snap lock seam unit.
Duct Automatic Line V
AML-V-Short
On the basis of the Line V, integrated with a feeding manipulator unit, flange forming unit, and automatic folding unit, the system ensures uncompromised duct quality while accommodating the size of the full box duct.
2. Spiral Duct Former Machine Series
High Speed Spiral Former machine
• Equipped with a pneumatic brake decoiler, a main machine and a run-out table.
• Maximum production speed 60m/min, depending on the diameter of the pipe.
• G.I. or AL 0.4 ~ 1.2mm, S.S. 0.4 ~ 0.8mm.
• Fly cutting
Spiral Former machine
• Maximum production speed 38m/min, depending on the diameter of the pipe.
• G.I. 0.4 ~ 1.2mm, S.S. 0.4 ~ 0.8mm.
• Saw blade cutting
Motorized Elbow Lock Machine
• Dia range Φ150 ~ Φ1500， depending on the thickness.
• Motorpower 1.5 ~ 2.2 kW * 2
• Forming speed 7r/min
• Maximum overall dimension 2400mm * 820mm * 890mm
Hydraulic Elbow Lock Machine
• Dia range Φ125 ~ Φ1250.
• Main power 4 kW + 12W cooling fan.
• Hydraulic oil 55L.
• Consumption of com-pressed air 75L/h 6bar.
• Max forming speed 120m/min
• Maximum overall dimension 2400mm * 820mm * 890mm
3. Fire Damper Automatic Line Series
Frame Forming Product Line
FD-120, VCD-150
Blade Forming Product Line
V-100/150 , FDB-72, VDB-145
4. Pittsburgh Lock Former Machine Series
Standard Pittsburgh Lock Former Machine
LC-10BR, LC-12, LC-12DR, LC-15DR, LC-12M, LC-20DR, R-15
Engineered with dual-side forming rollers for multi-process integration, To maximize multi-functionality, the 7 and 8 station machines have four processing stations in total, maximum six different types profile can be formed
Snap Lock Former Machine
SLC-20
Standing S Cleat Machine
SC-12
5. Swaging Machine Series
Motorized Swaging Machine
LX-15/18
Mainly used to produce and combine bending grooving of round tube. It can produce different shaped work pieces by special rolling wheels.
Manual Swaging Machine
LH-10
Unpowered type of swaging machine. affordable and efficient.
6. Flange Former Machine Series
TDF Flange Forming Machine
T-12, T-12S, T-15
TDF flange is currently the most widely used one duct flanges, with low cost, well-seal and easy-fabrication, especially suitable to produce a duct with medium section area and applied in large-scale industrial manufacture. As a flexible machine, TDF will adapt to an auto line with a Pittsburgh lock machine, notching and bending machine.
Duplex TDF Flange Forming Machine
2-T12, 2-T12S
Engineered to form TDF flange on both sides of the sheet in a single operation. This machine ensures uniform compression and airtight sealing for HVAC ductwork, with adjustable flange widths ranging from 1000 to 1530 mm (39.4″ to 60.2″) and a maximum linear feed rate of 6 m/min.
CGF1 Flange Forming Machine
CGF1-20/30
None
CGF2 Flange Forming Machine
CGF2-20/30
None
TDF Manual Folding Machine
WS-1.5×2050ATDF
This machine is used for folding TDF flange ducts. It adopts a bevel gear locking structure, and it’s lightweight and easy to move, which is highly suitable for use at construction sites and can bend TDF flange ducts of any size.
TDF HYD Folding Machine
WSY-1.5×2050ATDF
Building upon the TDF manual folding machine architecture, the power transmission system has been upgraded to a hydraulic cylinder-driven mechanism.
TDC Flange Forming Machine
T-20, T-25, T-30, T-35, T-40
TDC flange machine is composed of feeding frame, cold rolling forming machine and a cutting part. The cutting part can be divided into the grinding wheel cutting and non-stop cutting system, cutting system can be realized without stopping the cut-to-length. Cutting burr of small, can realize the full automation of production. The working speed is 6m/min.
Clip Forming Machine
CP-12
This Machine is designed for a total of two forming station, only need to install the corresponding forming roll, can produce the required 20,25,30,35 and 40 flange clip, among them, 20 and 30 flange clip is the standard.
Duplex PDF former machine
PDF-20 PDF-30
This machine can be formed at the flange (PDF) at the same time continuous rotary riveting. Production speed of 10 m /min. only needs to replace the corresponding roll, you can produce the 20mm for your production needs, 30mm or 35mm flange. The flange machine can be single-side or both sides at the same time.
TDF/PDF Square HYD Folder Machine
FD-2×1600
Specially designed for folded TDF and PDF flange of the duct. folder of type “L or 口”. The minimal length of the face of the conduit will be 150×150 mm. The machine is driven by hydraulic power, running smoothly, low noise, and also equipped with supporting table, the use of manual to the on-line, control the pressing and bending by foot switch, but also according to customer requirements of servo feeding, automatic pressing and bending.
7. Bending Grooving, Seam Closing Machine Series
Bending Grooving Machine
G1.5×1250-5, G1.2×2000-7
This machine is dedicated bending grooving machine, suitable for various thin plate. It can be shaped by one time or many times swaging. Even more, the roller can be changed in order to press the ideal shape.
Round Pipes Seam Closing Machine
YJB-1.2×1550
This machine serves as a post-process station downstream of the Pittsburgh lock former machine and 3-roller bending machine, engineered to close longitudinal seams or open hem on round pipes.
8. Complement Machine and Tools
Corner mold
T-12DC, T-20DC, T-25DC, T-30DC, T-35DC, T-40DC
None
Corner Automatic production line
The automatic production line is composed of decoiler, leveling system, servo feeding system, punch and dies components. Is different from the traditional processing mode, greatly improves the production efficiency and reduce production costs.
Corner assemble machine
CM-12
This machine is for fitting corners of TDF and TDC square duct as corollary equipment for rectangular duct line. Put the duct on appointed position. The machine finishes corner feeding. Pressing and fixing automatically. The corner and duct are fitted tightly with warping will be little. Low noise and effect is good. Many kinds of corners are workable.
HYD Seam lock machine
SL-12
This machine can be used with duct automatic line, TDF flange duct machine or TDC flange duct machine and Pittsburgh lock machine. It adopts Mitsubishi PLC to control, with long-time stable working ability, ergonomic design, easy operation and high efficiency. The seam lock speed can be 3 second/one duct.
Manual C cleat machine
C-750 C-910
A manually operated tool that forms uniform drive cleat edges on rectangular ductwork in seconds without set-up or adjustment. The upper handle forms the cleat and the lower handle opens the tool for easy removal of the material. Feature needle bearings. A quick-release is built into the lower handle.
Collar Make Machine
CMM-335
None
9. HVAC Plasma Cutting Machine
HVAC Plasma Cutting Machine
HVAC-3015, HVAC-5015
A fast, clean, economical way to cut light-gauge metal.
SHEET METAL MACHINE SERIES
1. Folder Machine Series
CNC HYD Folder machine
VHP series, HPS series
• Two axis CNC control system(Bend angles and backgauge).
• 800mm CNC back gauge driven by servo motor, and expandable up to 1250mm.
• Three functions foot pedal.
• Hydraulic pressure & Hold-down pressure adjustable by control system.
• More customized options
NC HYD Folder machine
HP series, HPK series
• One or two axis NC control system(at least bend angles).
• NC Touch Screen Control features 99 programs, each program has up to 20 bends & each bend has material compensation. It also incorporates a quick bend function for jobbing work
• Auto cycle: after clamping bottom beam will bend to pre-set angle and return, head unclamps to set position
• Roving two functions foot pedal incorporates control panel for maximum flexibility
• More customized options
Half HYD Folder Machine
MP series
• Hydraulic bending with manual clamp.
• Manual back gauge 650mm.
• Easy to use single angle programmable controller incorporating digital readout for angles from 0~130 degrees.
• Ground segmented fingers can be repositioned to suit many applications.
• Safety top beam support stop lever located on right side of machine.
Manual Pan Brake Machine
HB series
• Equipped with a graduation ruler on both sides, readout eliminates the bend angle guess work
• Manual back gauge 650mm.
• Bending angle adjustable mechanism angle range for 0~120 degrees.
• Ground segmented fingers can be repositioned to suit many applications.
Mechanical indexing HYD Folder Machine
PB series
• Manual back gauge 1250mm.
• Bending angle adjustable mechanism angle range for 0~135 degrees.
• Adjustable table crowing mechanism.
• Removeable station with foot pedal.
• Cost-effective and efficient
2. Shearing Machine Series
Motorized Shear Machine
• Adopted all steel welded structure.
• Simple structure, easy operation.
• Adjustable table crowing mechanism.
• Low energy consumption.
Hydraulic Shear Machine
• Hydraulic shearing.
• Widely used in metallurgy, light industry, machinery, metal and other thick steel plate processing.
Foot Power Shear machine
• Simple construction with a sliding guedevay and reliable control with trap-pull spring inside point fixed method.
• Equipped with a hold-down device to make it cutting better.
• Light and easy to move.
3. Asymmetrical 3-Roll Bending Machine
Motorized 3－Roll Bending Machine
W11G-2×1020, W11G-1.5×1300, W11G-1.5×1530
• NC control up & down top roll for curving adjustment.
• Upper roll can be separated, simple and efficient.
• With pre-bending function.
Manual 3-Roll Bending Machine
W11-2×1020, W11-1.5×1300, W11-1.5×1530
• Manual control up & down top roll for curving adjustment.
• Upper roll can be separated, simple and efficient.
ROLLFORMING PRODUCTION LINE SERIES
1. Forming Line
Shelf Beam Forming Line
• Equipped with a unpowered decoiler, a main machine and a run-out table.
• Customization is accepted.
Slotted Channel Forming Line
YX-41×21/41/61
• Equipped with a unpowered decoiler, a leveling&grooving machine, a notching machine, a main forming machine, and a run-out table.
• Customization is accepted.
Fire-proof door Duplex-C Door panel Forming line
None
Rolling Gate Forming Line
None